Busch-Infoline®
The Busch-Jaeger minding and alert system
Control Unit
Monitoring application with colour coded reset button and space for writing on. For monitoring a break or short circuit in a current loop. Status change of the relay contacts after commencement (selectable via jumper) or for the duration of the active alarm. Additional alert signalling with flashing illuminated button. Minimum duration of short circuit or cut-out selectable via jumper.
Alarm Control Unit
Alert signal application with optical and acoustic alert signal. For monitoring a break or short circuit in a current loop. The alert signal is activated after commencement (selectable via jumper) or for the duration of the active alert, with a flashing light, permanent humming tone and status change of the relay contacts. Deactivate the alert using the reset input. Wide lateral view due to spherical cap and very bright LEDs.
Signal/ Cancel Push Button
Colour-coded button with possibility for writing on, for activating or deactivating signals and alerts of the most differing kinds. Potential-free make-contact for low voltages. Additional use as a signal or control display with illuminated button. Illumination commencement can be coupled to the press-button function via jumper.
Signal Push Button with draw cord
Colour-coded button with possibility for writing on, for activating alarms, e.g. on the toilet for the handicapped. With reduced light/ control display. Similar to signal/ switching-off button application, equipped with additional 2.5m long draw cord that can be shortened.